(ESP-01)+(DHT-11) small footprint wifi humidity/temp asksensors IOT

[dstroy0]

You only need one programmer, and you can add as many of these sensors to your wifi network as you'd like.

Temperature & Humidity Monitoring Using the ESP-01 & DHT and the AskSensors Cloud

Temperature & Humidity Monitoring Using the ESP-01 & DHT and the AskSensors Cloud: In this instructable we are going to learn how to monitor the temperature and the humidity measurements using the IOT-MCU/ESP-01-DHT11 board and the AskSensors IoT Platform. I'm choosing the IOT-MCU ESP-01-DHT11...

www.instructables.com

 

[dstroy0]

A couple notes:

DHT-11 is an easy to use sensor, not necessarily the most accurate, but should give very repeatable results meaning you can calibrate it.
You don't have to use asksensors IOT platform, it's just an easy way to get started understanding how something like this might work.

 

[Gweedo's Growroom]

Niice,Nice, in still reading lol my uno is on the way, probably gonna order another and a kit to play with, and extra relays

 

[BH]

heres a nice greenhouse humidity level controller:

Humidistat- Humidity Level Controller

Make life easy with our humidistat. This Greenhouse humidity controller will automatically turn your mist maker and fan on when the desired humidity levels fall out of the preset range, and the humidity controller will turn the fogger and waterproof fan off when the humidity reaches your preset...

thehouseofhydro.com

 

[dstroy0]

Niice,Nice, in still reading lol my uno is on the way, probably gonna order another and a kit to play with, and extra relays

Start a thread and tag me if you need help figuring something out.

 

[Gweedo's Growroom]

Will do good sir

 

[spyralout]

Moving this to:

DIY and Tutorials

Great tips and hacks for growing or just plain life

phenohunter.org