Guest viewing is limited

Trichitect's Travails

Idlewilder said:
Have you tried wettable sulfur in veg? Also a good bleaching of everything
Click to expand...
Yeah, been spraying everything with sulfur, but it just comes back. I just picked up BioAg Supersil, hoping that helps. I've got some SLF-100 on the way, too, gonna use that as a foliar. Trying to attack from all angles: sulfur to knock it back, Silica for cell wall defense, and SLF as a bio-control. I just saw that @BH posted some stuff from Southern Ag, so that will be in the mix soon, too. I haven't bleached anything, so thanks for that tip ?.
 
Trichitect said:
Yeah, been spraying everything with sulfur, but it just comes back. I just picked up BioAg Supersil, hoping that helps. I've got some SLF-100 on the way, too, gonna use that as a foliar. Trying to attack from all angles: sulfur to knock it back, Silica for cell wall defense, and SLF as a bio-control. I just saw that @BH posted some stuff from Southern Ag, so that will be in the mix soon, too. I haven't bleached anything, so thanks for that tip ?.
Click to expand...
I've battled PM last year or so. Finally gone I believe. Bleached inside of tent cleaned out intake fans and attached filter filaments. I think the biggest thing was throwing out all the old cloth pots I'd been using and haven't cleaned in years ?.
Haven't seen any since. /knocks on wood.
 
Trichitect said:
Yeah, been spraying everything with sulfur, but it just comes back. I just picked up BioAg Supersil, hoping that helps. I've got some SLF-100 on the way, too, gonna use that as a foliar. Trying to attack from all angles: sulfur to knock it back, Silica for cell wall defense, and SLF as a bio-control. I just saw that @BH posted some stuff from Southern Ag, so that will be in the mix soon, too. I haven't bleached anything, so thanks for that tip
?
.
Click to expand...
For surface and prevention in clones and misc I suggest physan w0 over bleech and misc
As a suggestion look into physan 20 as a disinfectant/virusicide/fungicide

why= it’s a 14 day surface cleaning protection ( read manuals of cleaners what it can be applied, physan is even accepted for medical areas )if not removed Vs bleech it will evaporate but also is bad for u to breath in and is corrosive . This product is not only super effective , longer lasting and safer to use. my gallon bottle even thou I even use it to clean my bathroom-kitchen floors and grow room misc and floors/walls weekly It still takes me years to even get close to using the bottle. Bleech isn’t also approved to ag use in commerical, physan 20 is. I realize it’s easy to bleech stuff but if u see the effectiveness fail so quickly I have less hopes but also don’t believe it’s the best prevention measure for non water prevention vs products like physan 20. Also if u are doing this for hlvd or prevention on surfaces and spraying it. Don’t expect ur prepped bottled but Also using bleech is a temp kill and many virus or molds take along time on bleech. Like for bleech to kill many virus including hlvpd is 10-20 min depending on who you listen to and physan is 90 seconds-5min depending on species

people also need to realize pm and mold is always in the air, it’s the vulnerability to the plant and enviroment like lack of air flow between plants and vulnerability as a less resistant pheno is ur biggest enemy otherwise these plants in nature def Would be more vulnerable vs a grow room (not saying they don’t mold outdoors but good lord outdoors at least in my region is very harsh and def harsher whole ti,e than my indoors ). Point is I run high rh most of time from veg -mid flower since I’m following vpd, does mold get promoted at above 60%? Hell yes but airflow and genetics but also healthy plants will do more than pre cleaning rooms and using harsh chemicals like bleech, exp if plants/you in room . Physan if used even when plants there like for walls and floors is perfect for 14 day after washed/prewhipped for a prevention tool.

from hplvd to surface and mold prevention/killing/cleaning. Physan 20 are my tool and I’m glad a og grower showed me this back in the day.

For black mold/virus mix at 1T per gal of water, If cleaning floors or walls i pre wipe off any dust or obvious contamination than spray and never wipe off. Log and do again every 7-21 days but also for clonecutting any part of plant I keep scissors soaked while doing it in physan at same rate and have two scissors but being it needs 90 seconds I can treat the scissors I’m using as a singular patient and that’s def more prevention than most people are doing For that ( iso doesn’t work )
Amazon product ASIN B00P8KXGN0
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom