Willie's Supercalifragilistic Gummy Recipe

[OldMedUser]

There's no everclear taste as I purge the oil by decarbing at the end after all the solvent has been evapped off. Generally using ISO for it. It's not cleaned up to be smokeable as that removes too much medicine. Just found a good paper on extracting with ISO and why it's a good way to do it. EverClear can be used to clean it up but much less of that is needed. I haven't read the whole procedure yet.

RSO 2.0 A Classic Recipe Updated

I was at Michaels with the wife and almost bought some of their molds but really wanted the cannabis ones for meds. No mix-ups when I give friends some of each kind. I should be getting big batches of CBD and THC oils lab tested so I can calculate out the doses I want. The CBD oil is going to have a noticeable amount of THC in it so trying to find a strain for all CBD only. Might have one but haven't sprouted the seeds yet.

For lots of pot themed molds and such PJ Bold has lots. Wish they had a store in Canada tho.

Custom Silicone Molds | Marijuana Candy Molds | PJ Bold

PJ Bold offers professional silicone molds, marijuana candy molds & stamps at great prices. We offer custom mold as per needs. Visit our site to buy molds!

www.pjbold.com

 

[Willie]

There's no everclear taste as I purge the oil by decarbing at the end after all the solvent has been evapped off. Generally using ISO for it. It's not cleaned up to be smokeable as that removes too much medicine. Just found a good paper on extracting with ISO and why it's a good way to do it. EverClear can be used to clean it up but much less of that is needed. I haven't read the whole procedure yet.

RSO 2.0 A Classic Recipe Updated

I was at Michaels with the wife and almost bought some of their molds but really wanted the cannabis ones for meds. No mix-ups when I give friends some of each kind. I should be getting big batches of CBD and THC oils lab tested so I can calculate out the doses I want. The CBD oil is going to have a noticeable amount of THC in it so trying to find a strain for all CBD only. Might have one but haven't sprouted the seeds yet.

For lots of pot themed molds and such PJ Bold has lots. Wish they had a store in Canada tho.

Custom Silicone Molds | Marijuana Candy Molds | PJ Bold

PJ Bold offers professional silicone molds, marijuana candy molds & stamps at great prices. We offer custom mold as per needs. Visit our site to buy molds!

www.pjbold.com

I got my leaf molds from PJBold. I wish Michaels had them. The blue silicone molds from there are top notch quality....best molds I have seen in person! I like the leaf molds as the candy seems to dry faster and it tells what it is as well.

I just checked I still have a quart of chocolate in the cabinet......hmmmmm

 

[pwnytailjoe]

I can't believe I couldn't find this thread... smdh.

A couple of questions:

Do you see any reason the corn syrup couldn't be substituted with agave nectar or honey?

I can get a small amount of Goji OG terps if I don't stall too long. The original talk was to make a plain green cake with the terps but I figured the heat would destry most of them so we're exploring options. I assume the heat in this scenario would dissipate most of them as well.

Also, I know I'm posting pineapple but I'm on a coconut kick right now. That plan is to convert the kief in coconut oil and do the plain gelatin recipe with a touch of coconut extract to drive the point home.

I have 10 molds with 8 worms on them

 

[Willie]

I can't believe I couldn't find this thread... smdh.

A couple of questions:

Do you see any reason the corn syrup couldn't be substituted with agave nectar or honey?

I can get a small amount of Goji OG terps if I don't stall too long. The original talk was to make a plain green cake with the terps but I figured the heat would destry most of them so we're exploring options. I assume the heat in this scenario would dissipate most of them as well.

Also, I know I'm posting pineapple but I'm on a coconut kick right now. That plan is to convert the kief in coconut oil and do the plain gelatin recipe with a touch of coconut extract to drive the point home.

I have 10 molds with 8 worms on them

I use the corn syrup for moldability........makes them come out close to perfect. I also think it helps lock that oil in.......so the gummies don't have sticky/oily back sides. You do have to watch using real juices for a similar reason........it can effect the set..........using the real gelatin can help with that better than boxed jello can.

 

[OldG]

This week Michaels has their halloween molds on for 40% off... the ghosts and tombstones work the best (4 of these weigh 48 grams....4 of my regular gummies way 24 grams so they are 2 gummies each.
50 grams of PCG Banana Durban Gushers and 3 grams of very clean RSO into 100 gummies...they are pretty strong
50 X 25 =12500 less 20% transfer loss = 10,000 mg of THC into 120 candies = about 80mg each. Then the 2700MG from the RSO puts them to right on 100mg each normal one or 200 for the ghosts and tombstones.

I had one tombstone. The math feels right.

Oh these are orange (i use guar gum and liquid sunflower lethicin to keep them together, and platinum food grade gelatin with my jello...super easy mixing).

 

[Willie]

This week Michaels has their halloween molds on for 40% off... the ghosts and tombstones work the best (4 of these weigh 48 grams....4 of my regular gummies way 24 grams so they are 2 gummies each.
50 grams of PCG Banana Durban Gushers and 3 grams of very clean RSO into 100 gummies...they are pretty strong
50 X 25 =12500 less 20% transfer loss = 10,000 mg of THC into 120 candies = about 80mg each. Then the 2700MG from the RSO puts them to right on 100mg each normal one or 200 for the ghosts and tombstones.

I had one tombstone. The math feels right.

Oh these are orange (i use guar gum and liquid sunflower lethicin to keep them together, and platinum food grade gelatin with my jello...super easy mixing).

View attachment 138696

Those are great.......Michaels has so many holiday choices in their molds.