Nothing Fancy
- Thread starter Caddis
- Start date
Caddis
In Bloom
Project FX has been redirected.
Grape Pupil will remain in tact.
All others will be re-evaluated. (edit)
Looking at the 8” net cup, should be an easy transition from a 5” pot?
The uc cups have a raised center, so may have to get rough.
If I’ve learned anything, they can take a punch.
Edit: parted out sounded cold
Grape Pupil will remain in tact.
All others will be re-evaluated. (edit)
Looking at the 8” net cup, should be an easy transition from a 5” pot?
The uc cups have a raised center, so may have to get rough.
If I’ve learned anything, they can take a punch.
Edit: parted out sounded cold
Last edited:
I've done an emergency transplant from 5.5" square pots in F&D to 6" round net pots in RDWC.
Caddis
In Bloom
I’ve been slashing and burning this morning.
I’m very happy with the results of the FX bubbler with 5” pots hydroton medium.
The roots looked good, not sure if I should expect more development?
I’m weak in regards to that, it seems, even in rdwc?
Seeing this one gives me confidence the Grape Pupil will slip right in to her new home.
I’m very happy with the results of the FX bubbler with 5” pots hydroton medium.
The roots looked good, not sure if I should expect more development?
I’m weak in regards to that, it seems, even in rdwc?
Seeing this one gives me confidence the Grape Pupil will slip right in to her new home.
Attachments
Caddis
In Bloom
I’m going to try the cloner bucket with the pond mister, I used it to clone all the plants except the GP.
It worked, in spite of being way to hot.
I put some in rw plugs and rr’s set in 2” net cups with foam collar. I’m just seeing what works best, mostly playing! ?
I just cut, rough up, dunk in aloe water and stab end in aloe, stick in plug.
The rw plugs, I wedged clay to keep them closed. Just stuck in the rr’s.
I
It worked, in spite of being way to hot.
I put some in rw plugs and rr’s set in 2” net cups with foam collar. I’m just seeing what works best, mostly playing! ?
I just cut, rough up, dunk in aloe water and stab end in aloe, stick in plug.
The rw plugs, I wedged clay to keep them closed. Just stuck in the rr’s.
I
Caddis
In Bloom
Hey guys
Ha, last post seems be be lacking some pics.
I put the plugs in there, humidity is higher. May need to clip some leaves, we’ll see.
Transplanting the GP did not go as well as I had hoped.
Root ball was not established enough to hold together, boot almost wasn’t big enough. Had to tie it off.
I threw them under fluorescent, clones will be perfect, not sure about the other. That light is not overpowering.
I don’t want to hang Leds and the mh is done for the summer.
Didn’t get it centered, that’s par! ?
Ha, last post seems be be lacking some pics.
I put the plugs in there, humidity is higher. May need to clip some leaves, we’ll see.
Transplanting the GP did not go as well as I had hoped.
Root ball was not established enough to hold together, boot almost wasn’t big enough. Had to tie it off.
I threw them under fluorescent, clones will be perfect, not sure about the other. That light is not overpowering.
I don’t want to hang Leds and the mh is done for the summer.
Didn’t get it centered, that’s par! ?
NotAquaMan
In Bloom
Good shit bro.
Hey I just picked up a Dewey Mister! I needed something small for the 3x1 propagation area of the tent. I like the simple concept and design so far, let's see how it performs. Our old Ez-Cloner is just too big and cumbersome, it's great for big pHeno hunts but we're not gonna need that for the next few runs.
Caddis
In Bloom
Thanks, I’m just messing, waiting on the solos.
Update on that, too early to set the timer for feeding.
Haven’t watered since relocating.
I’m wondering if rooters and rw are smart starting out.
The rw might drown out? Once established it’s fine.
Feel free to jump in, I’m still learning.
I can only figure out what works by throwing stuff at the wall.
Caddis
In Bloom
Ha, I bought that a couple years ago, works good.
The adjustment is pretty straightforward.
Not sure how I even got on the fogger?
I built a spray cloner out of a 12 gal tote, but it’s more involved.
I think I like stabbing a clone in a plug from a simplicity standpoint.
Caddis
In Bloom
Good to see you got your thread going.
Didn’t want to junk it up with my nonsense. )
That looks really clean, those wall panels would sure help with housekeeping.
That tape must be pretty serious stuff.
Nice work!
Seems a shame to get it all dirty! ?
NotAquaMan
In Bloom
Thanks yeah that durofoam is cheap, reflective and easy and to clean. The tape is blueskin window and door flashing tape. Sticks like mad and non permeable so I can wash the floors. Every single seam in the room was taped. Now I need to get the door done. I bought a new one so I can cut a hole in it for a window AC... No holes in the walls that way. Still a couple days work I think.
NotAquaMan
In Bloom
SC shredder? I know I'm a noob
Caddis
In Bloom
NotAquaMan
In Bloom
Ok I feel better now lol
NotAquaMan
In Bloom
Going 3 gal pots with sunshine 4 and adding 25% vermiculite possibly a tiny bit more perlite. Mega crop since I have it and it's done me well. Have full environmental controllers with heater, AC, dehumidifier, humidifier and CO2
and here I thought they just made skateboard decks. Silly of me to think they wouldn't delve into weed related stuff too.
Now I'm surprised why these guys haven't branded their own concentrates yet:
